kopik
Créer
Industrie & mécaniqueVérifiée par Kopik: Sources officielles relues et réponses testées par Kopik

When to replace a bike chain: wear thresholds and measurement

A stretched chain wears out your cassette and chainrings, so knowing when to replace it protects the rest of the drivetrain. This page covers the elongation thresholds, how to measure them and how to fit a new chain.

Posez votre question

Compte gratuit requis

Chaque question est indépendante · 1 offertes par mois, puis avec l'abonnement.

Les réponses sont rédigées par un modèle de langage à partir des seuls documents de cette base, avec leurs sources numérotées. Elles peuvent être inexactes et ne constituent pas un conseil juridique, médical ou financier : vérifiez les sources avant toute décision importante.

The three thresholds: 0.5%, 0.75% and 1%

Chain wear is measured as a percentage of elongation of the pitch, which is 12.7 mm (1/2 inch) on a new chain. Up to 0.5%, the chain is in good condition. At 0.5%, replace it soon: the cassette is still fine. At 0.75%, replace it now, the cassette is starting to suffer. At 1%, chain and cassette both need replacing and the chainrings are likely affected too.

The seasonal checklist is stricter for modern drivetrains: beyond 0.5% on 11 and 12-speed, or 0.75% on 9 and 10-speed, the chain needs replacing.

Replacing at 0.5% means you can run 2 to 3 chains on the same cassette. Waiting until 1% means replacing everything at once.

Measuring with a checker or a ruler

A two-sided checker such as the Park Tool CC-3.2 gives a quick answer: if the 0.5% side drops between the links, wear has started; if the 0.75% side drops, replace the chain immediately.

With a ruler or callipers, measure 12 full links pin to pin. The theoretical distance is 304.8 mm. It reads 306.3 mm at 0.5%, 307.1 mm at 0.75% and 307.8 mm at 1%.

Fitting the new chain

Use a chain matched to your speed count, a chain breaker and a quick link of the correct size. Size it against the old chain, or around the largest chainring and largest cog without the derailleur, plus 2 links.

Close the quick link, pull to lock it, then shift through all gears to check for skipping or noise.

Questions fréquentes

How many kilometres does a chain last?

The guides give averages of 3,000 to 5,000 km on a road bike in dry conditions, 1,500 to 3,000 km in XC mountain biking and 500 to 1,500 km in enduro or DH with mud and rain. These figures vary enormously with cleaning, lubrication and weather, so measuring wear remains the reliable method.

Why does a new chain skip on my cassette?

If the old chain went beyond 1% elongation, the cassette teeth have deformed to match it and a new chain no longer hooks on correctly. In that case the cassette, and possibly the chainrings, must be replaced too.

Does an e-bike chain have a different replacement threshold?

No. The threshold is the same as on a regular bike (0.75% elongation), but an e-bike chain reaches it faster.

Pour les développeurs et les agents

Intégrer / API / MCP

Branchez cette base à Claude, Cursor, ChatGPT ou votre propre application. Chaque requête API ou MCP coûte 0,10 €, débitée de votre crédit Kopik (non facturée si rien n'est trouvé). Il vous faut une clé API : créez-la depuis votre tableau de bord.

MCP pour vos agents

Adresse du serveur MCP de cette base (outils ask_base et search_base) :

URL MCP
https://kopik.io/api/mcp?base=latelier-bike-mechanics-en
Claude Code, Cursor et autres clients
Claude Code
claude mcp add --transport http kopik-latelier-bike-mechanics-en "https://kopik.io/api/mcp?base=latelier-bike-mechanics-en" --header "Authorization: Bearer kpk_…"
Configuration JSON (mcpServers)
{
  "mcpServers": {
    "kopik-latelier-bike-mechanics-en": {
      "url": "https://kopik.io/api/mcp?base=latelier-bike-mechanics-en",
      "headers": {
        "Authorization": "Bearer kpk_…"
      }
    }
  }
}

API REST pour vos applications

mode vaut "answer" (réponse rédigée + sources) ou "passages" (passages bruts seulement). Ajoutez un maxPriceCents facultatif pour plafonner le prix : si la base coûte plus cher, l'appel est refusé sans rien débiter.

curl
curl -X POST https://kopik.io/api/v1/bases/latelier-bike-mechanics-en/query \
  -H "Authorization: Bearer kpk_…" \
  -H "Content-Type: application/json" \
  -d '{"question": "Votre question ici", "mode": "answer"}'

Pour commencer

  1. Créez une clé dans votre tableau de bord et rechargez votre crédit.
  2. Remplacez kpk_… par votre clé.
  3. Tout le détail (réponses, erreurs, exemples JS et Python) : documentation développeurs.