Used coolant storage and disposal: EPA used oil rules for machine shops
Spent cutting oils that meet the federal definition of used oil fall under the EPA used oil standards in 40 CFR Part 279. This page covers the generator rules shops meet most often.
Posez votre question
Compte gratuit requisLes réponses sont rédigées par un modèle de langage à partir des seuls documents de cette base, avec leurs sources numérotées. Elles peuvent être inexactes et ne constituent pas un conseil juridique, médical ou financier : vérifiez les sources avant toute décision importante.
Storage at the shop
Containers and aboveground tanks holding used oil must be clearly labeled or marked with the words "Used Oil", and so must fill pipes to underground tanks. They must be in good condition (no severe rust or structural defects) and not leaking.
Used oil may only be stored in tanks and containers, or in units permitted for hazardous waste. Storage in unpermitted lagoons, pits or surface impoundments is prohibited.
Mixing, spills and transport
EPA advises storing used oil separately from solvents and chemicals and not mixing it with anything, since mixing with hazardous waste can bring it under hazardous waste rules.
After a release, the generator must stop it, contain it, clean up, and repair or replace leaking containers before reuse.
Shipments need a transporter with an EPA identification number, with exceptions such as self-transport of no more than 55 gallons at a time to an approved collection center.
Questions fréquentes
What counts as used oil?
Under 40 CFR 279.1, used oil is any oil refined from crude oil, or any synthetic oil, that has been used and as a result is contaminated by physical or chemical impurities.
Do the Part 279 rules apply if the oil is sent for disposal instead of recycling?
EPA says the Part 279 standards apply until the oil is disposed of or sent for disposal. Hazardous used oil then follows RCRA Subtitle C; non-hazardous used oil is solid waste under Subtitle D.
Can states have stricter rules?
Yes. EPA notes that states may have more stringent requirements and advises checking with your state program.
Intégrer / API / MCP
Branchez cette base à Claude, Cursor, ChatGPT ou votre propre application. Chaque requête API ou MCP coûte 0,10 €, débitée de votre crédit Kopik (non facturée si rien n'est trouvé). Il vous faut une clé API : créez-la depuis votre tableau de bord.
MCP pour vos agents
Adresse du serveur MCP de cette base (outils ask_base et search_base) :
https://kopik.io/api/mcp?base=us-metalworking-fluids-machining-safetyClaude Code, Cursor et autres clients
claude mcp add --transport http kopik-us-metalworking-fluids-machining-safety "https://kopik.io/api/mcp?base=us-metalworking-fluids-machining-safety" --header "Authorization: Bearer kpk_…"{
"mcpServers": {
"kopik-us-metalworking-fluids-machining-safety": {
"url": "https://kopik.io/api/mcp?base=us-metalworking-fluids-machining-safety",
"headers": {
"Authorization": "Bearer kpk_…"
}
}
}
}API REST pour vos applications
mode vaut "answer" (réponse rédigée + sources) ou "passages" (passages bruts seulement). Ajoutez un maxPriceCents facultatif pour plafonner le prix : si la base coûte plus cher, l'appel est refusé sans rien débiter.
curl -X POST https://kopik.io/api/v1/bases/us-metalworking-fluids-machining-safety/query \
-H "Authorization: Bearer kpk_…" \
-H "Content-Type: application/json" \
-d '{"question": "Votre question ici", "mode": "answer"}'Pour commencer
- Créez une clé dans votre tableau de bord et rechargez votre crédit.
- Remplacez
kpk_…par votre clé. - Tout le détail (réponses, erreurs, exemples JS et Python) : documentation développeurs.